Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 21

Page 21 highlights

Pin assignments and signal names for SERIAL Terminal 9876 5 43 21 Pin No. Signal Name NC (not connected) RXD TXD Non use GND (Ground) Non use RTS CTS Shorted in this set NC (not connected) These signal names are those of computer specifications. Communication parameters Signal level: RS-232C compliant Synchronization method: Asynchronous Baud rate: 9600 bps Parity: None Character length: 8 bits Stop bit: 1 bit Flow control: None Basic format for control data The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, then the parameter signal does not need to be sent. STX C1 C2 C3 : P1 P2 P3 P4 P5 ETX Start (02h) Colon End (03h) Command Command PON POF AVL AMT IMS 3-character command (3 bytes) Parameter(s) (1 - 5 bytes) Parameter None None ** 0 1 None SL1 S1A S1B SL2 SL2A SL2B HM1 HM2 HM3 HM4 DP1 DV1 PC1 DL1 Control details Power ON Power OFF Volume 00 - 63 Audio MUTE OFF Audio MUTE ON Input select (toggle) SLOT 1 input (SLOT1) SLOT 1A input (SLOT1A) SLOT 1B input (SLOT1B) SLOT 2 input (SLOT2) SLOT 2A input (SLOT2A) SLOT 2B input (SLOT2B) HDMI 1 input (HDMI1) HDMI 2 input (HDMI2) HDMI 3 input (HDMI3) HDMI 4 input (HDMI4) DisplayPort input (DisplayPort) DVI-D IN input (DVI-D) PC IN input (PC) DIGITAL LINK input (DIGITAL LINK) English 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
21
English
Pin assignments and signal names for SERIAL
Terminal
6
7
8
9
1
3
4
5
2
Pin No.
Signal Name
NC (not connected)
RXD
TXD
Non use
GND (Ground)
Non use
RTS
Shorted in this set
CTS
NC (not connected)
These signal names are those of computer
specifications.
Communication parameters
Signal level: RS-232C compliant
Synchronization method: Asynchronous
Baud rate: 9600 bps
Parity: None
Character length: 8 bits
Stop bit: 1 bit
Flow control: None
Basic format for control data
The transmission of control data from the computer
starts with a STX signal, followed by the command, the
parameters, and lastly an ETX signal in that order. If
there are no parameters, then the parameter signal does
not need to be sent.
STX
C1
C2
C3
P1
P2
P3
P4
:
P5
ETX
Start
(02h)
3-character command
(3 bytes)
Colon
Parameter(s)
(1 - 5 bytes)
End
(03h)
Command
Command
Parameter
Control details
PON
None
Power ON
POF
None
Power OFF
AVL
**
Volume 00 - 63
AMT
0
Audio MUTE OFF
1
Audio MUTE ON
IMS
None
Input select (toggle)
SL1
SLOT 1 input
(SLOT1)
S1A
SLOT 1A input
(SLOT1A)
S1B
SLOT 1B input
(SLOT1B)
SL2
SLOT 2 input
(SLOT2)
SL2A
SLOT 2A input
(SLOT2A)
SL2B
SLOT 2B input
(SLOT2B)
HM1
HDMI 1 input
(HDMI1)
HM2
HDMI 2 input
(HDMI2)
HM3
HDMI 3 input
(HDMI3)
HM4
HDMI 4 input
(HDMI4)
DP1
DisplayPort input
(DisplayPort)
DV1
DVI-D IN input
(DVI-D)
PC1
PC IN input (PC)
DL1
DIGITAL LINK input
(DIGITAL LINK)