Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 35
Optimum value for Clamp Position
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
[H-position] Adjust the horizontal position with . [H-size] Adjust the horizontal size with . [Over scan] Turn image over scan On/Off. Configurable signals are as follows: 525i, 525p, 625i, 625p, 750/60p, 750/50p (Component Video, RGB, DVI-D, SDI, HDMI) 1125 (1080) / 60i, 50i, 60p, 50p, 24p, 25p, 30p [V-position] Adjust the vertical position with . [V-size] Adjust the vertical size with . [Dot clock] [Clock phase] [Clamp position] (During PC input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized. (During PC input signal) In some cases, frame of the screen appears blurred or smudged, when RGB signal or PC signal are input. (During PC input signal) Adjusts the clamp position when black parts of the image have no detail due to underexposure or are tinged with green. Optimum value for Clamp Position adjustment When black parts have no detail due to underexposure (blackout) ● Value that causes least blackout is the optimum. When black parts are tinged with green ● Value that cancels the greenishness without causing blackout is the optimum. [On] [Off] Note ● This menu cannot be adjusted during 4K mode. ● When [Off] is set, [H-size] and [V-size] cannot be adjusted. Note ● In some cases, noise appears outside the area picture is displayed, but it is not a malfunction. English 35