Panasonic DMC-FX5 Digital Still Camera - Page 82
STABILIZER], MIN. SHTR SPEED], For details on [REC] mode menu settings, refer to P21.
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Advanced (Recording pictures) Note • When you take pictures in dark places, picture noise may become noticeable. If picture noise becomes a problem, we recommend that you take pictures after increasing the setting for [NOISE REDUCTION] or lowering the setting for each of the items other than [NOISE REDUCTION]. [STABILIZER] For details on [REC] mode menu settings, refer to P21. Using one of these modes, jitter during picture taking is detected, and the camera automatically compensates for the jitter, enabling jitter-free images to be taken. Applicable modes [OFF] [AUTO]: [MODE1]: [MODE2]: The optimum jitter compensation is selected depending on the condition. Jitter is always compensated during [REC] mode. The jitter is compensated for when the shutter button is pressed. Note • The stabilizer function may not be effective in the following cases. - When there is a lot of jitter. - When the zoom magnification is high. - In digital zoom range. - When taking pictures while following a moving subject. - When the shutter speed becomes slower to take pictures indoors or in dark places. Be careful of camera jitter when you press the shutter button. • The setting is fixed to [MODE2] with [SELF PORTRAIT] in Scene Mode and to [OFF] in [STARRY SKY] in Scene Mode. • The setting is fixed to [MODE1] in Motion Picture Mode. [MIN. SHTR SPEED] For details on [REC] mode menu settings, refer to P21. You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also, you can set it faster to reduce the blur of the subject. Applicable modes: ³ [1/250]/[1/125]/[1/60]/[1/30]/[1/15]/[1/8]/[1/4]/[1/2]/[1] Minimum shutter speed setting Brightness Jitter 1/250 Darker Less 1 Brighter More Note • This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speed other than [1/8 ], [ ] appears on the screen.) • Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we recommend using a tripod and the self-timer for taking pictures. • Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in red when the shutter button is pressed halfway. • The setting is not available when [INTELLIGENT ISO] is being used. 82 VQT1Y62