Panasonic WVCU360C WVCU360C User Guide - Page 17
CONTROLLER SETUP PROCEDURES (PS•Data), Prior to Setup, Buttons and Controls used for Setup
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CONTROLLER SETUP PROCEDURES (PS•Data) To display the setup menus for the WV-CU360C System Controller on the LED display, set the MODE switch and power up the controller as described below. s Prior to Setup Do the following before entering the setup mode. 1. Confirm that all necessary connections and switch settings are complete. 2. With the power turned off, move bit #6 of the MODE switch on the rear to ON (administrator) position. 3. Supply power to the controller. 4. Turn on the power of cameras and other system units. 5. The LCD displays [SEtUP]. The controller is ready to enter the setup mode. When setup is completed, restore the switch to its original position. 1. With the power turned off, move bit #6 of the MODE switch on the rear to OFF (operator) position. 2. Supply power to the controller. s Buttons and Controls used for Setup The following buttons and joystick operations are used in the setup operation. There are three ways to select a parameter, but the following pages only describe the selection by use of the joystick. Instead of operating the joystick, you can enter the number enclosed in brackets with the numeric keys or press the plus and minus buttons. 0 9 CAM SET MON ESC Numeric buttons: To select a parameter To enter a password or parameter CAM/SET button: To confirm the selected menu, selected parameter or entered password To enter a submenu MON/ESC button: To return to the previous menu L R DOWN UP L R Up: To select a setup menu Down: To select a setup menu UP R or DOWN UP L R or DOWN STILL Left: To decrease the parameter - EL-ZOOM Right: To increase the parameter + 17