Panasonic WVCU360C WVCU360C User Guide - Page 53
Preset Position button PRESET POSI/CAM POSI, Joystick Controller UP/DOWN/L/R
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
u Joystick Controller (UP/DOWN/L/R) Used to operate the Pan/Tilt Head manually, or to move the cursor to the desired position on the SETUP MENU of the Matrix Switcher. UP: DOWN: L: R: Upward Downward Left Right i Iris buttons (IRIS CLOSE/OPEN) Close or open the lens iris of cameras equipped with the specified lens. When these buttons are pressed at the same time, the lens iris is reset to the factory setting. o Focus buttons (FOCUS NEAR/FAR) Adjust the lens focus of cameras equipped with the specified lens. When these buttons are pressed at the same time, the lens focus is set automatically when the specified camera, such as the WV-CS854, is used. !0 Zoom buttons (ZOOM TELE/WIDE) Zoom the image in or out if the camera is equipped with the specified lens. !1 Auxiliary button (AUX) In combination with the number buttons 1 to 4, controls the Auxiliary switches for the Receiver, Wiper and Defroster. Press the numeric button, then press this button to turn the Auxiliary switches for the Wiper or Defroster On or Off. 1: Auxiliary Switch 1 2: Auxiliary Switch 2 3: Wiper 4: Defroster !2 Panning button (PAN) In combination with the numeric button 1 or 2, is used to control the panning mode of the Pan/Tilt Head. Press the numeric button, then press this button to turn the Panning mode On and Off. 1: Auto Panning Mode 2: Random Panning Mode !3 Preset Position button (PRESET POSI/CAM POSI) In combination with the numeric buttons, moves the camera to the desired preset position. Also selects a camera position by a serial number assigned independently of the camera number. Specify a number, then press ALT and finally this button. !4 Camera/Set button (CAM (SET)) CAM: Used for camera selection. To select a camera, enter the desired camera number with the numeric buttons, and then press this button. SET: Executes the currently highlighted setting in the setup menu of the Matrix Switcher and opens a submenu. !5 Numeric buttons (0 - 9) These buttons are used for numerical input such as camera and monitor selection, sequence and preset position, etc. Buttons 2, 4, 6 and 8 are also used to move the cursor to the desired position on the Camera's Set Up Menu. !6 Monitor/Escape button (MON (ESC)) MON: Used for monitor selection. To select a monitor, enter the monitor number with the numeric buttons, and then press this button. ESC: Escapes from or executes the currently highlighted selection in the setup menu of the matrix switcher. !7 Alternate button (ALT) Alternates the function of dual-function buttons between the normal and the alternate function. It also enables the CAM MENU button and SET UP button to display the assigned menu or setup table on the selected monitor. The indicator is lit while the function mode is selected. !8 Sequence Pause button (PAUSE) Pauses a sequence that is being run on the selected monitor. !9 Function button (FUNCTION) Pressing this button in combination with another operation button activates a specific function. @0 Alarm Acknowledgment and Reset button (ACK/RESET) Cancels an activated alarm. To cancel the alarm, the monitor must first be selected. Press this button once to acknowledge the activated alarm (the indicator blinks rapidly), then press it again to reset the alarm. 55