Panasonic WVCU360C WVCU360C User Guide - Page 35
REMOTE SETUP of UNITS & CAMERAS, System Unit Setup, Camera Setup
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
REMOTE SETUP of UNITS & CAMERAS You can set up the system unit and the camera with the setup menu by this controller. You can use the controller to set up system units and cameras. This section describes the main remote setup procedures. Some of the descriptions may not be applicable if they refer to devices not equipped in your system. For further information on the default settings and operating procedures, refer to the Operating Instructions included with the individual units. s System Unit Setup 1. Select the desired system unit compatible with PS •Data mode. 2. Press the SETUP/FUNCTION button for more than 2 seconds. The SETUP indicator lights up. The Setup menu for the system unit appears on the monitor. s Camera Setup 1. Select the desired camera. 2. Press the CAM SETUP/CAM FUNCTION button for 2 seconds or more to access the Camera Setup menu. The CAM SETUP indicator lights up. CAM SETUP CAM FUNCTION (Example of Camera Setup menu) *** SET UP MENU *** PRESET 1* MAP HOME POSITION 15 SELF RETURN 10MIN AUTO MODE AUTO PAN AUTO PAN KEY SEQ DIGITAL FLIP OFF LOCAL/REMOTE LOCAL SPECIAL1 CAMERA RS485 SET UP 3. Move the cursor with the numeric buttons 2 (Up) or 8 (Down), then select a parameter with the buttons 6 (Right) or 4 (Left). SETUP FUNCTION Example of Setup Menu for WJ-MP204C WJ-MP204C SETUP MENU x.xx COMMUNICATION SYSTEM 3. To complete the setup, press the SETUP/FUNCTION button for 2 seconds or more. The SETUP indicator goes off. Note: If you change the default baud rate or parity check, the system unit setup function is disabled. Keys used for system unit setup UP L RL R To move the cursor. DOWN STILL - EL-ZOOM + To select a parameter. CAM To execute the parameter or enter a submenu SET MON To return to the previous menu ESC 35 MON CAM ESC LOGOUT SET 4. Press the CAM/SET button to execute the parameter or enter a submenu. MON CAM ESC LOGOUT SET 5. To return to the previous menu, press the MON/ESC button. 6. Press the CAM SETUP/CAM FUNCTION button for 2 seconds or more to complete the camera setup.