Panasonic WVCU360C WVCU360C User Guide - Page 23
Login/Logout, Log In, Log Out
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
s Login/Logout q Log In Right after powering up, the controller will be operable without password entry, provided user password certification is set to Off in the setup menu. When set to On, you will be prompted to enter your registered password. The default password is "12345", but you need to remember the password assigned to you by your system administrator. 1. Insert the DC plug into the DC 9 V IN jack and connect the AC adapter to an AC outlet. 2. The controller number, software versions and [LogIn] appear in that order on the LED display. The LOGIN indicator lights up. The controller is now operable unless password certification is activated. If it is not activated, proceed as follows. 3. Press the CAM/SET button. 4. Enter a 5-digit user password with the numeric buttons. The initial factory setting is [12345]. 5. Press the CAM/SET button. 6. If password entry for user authorization has been successful, the LOGIN indicator lights up. The unit assigned to the UNIT A/UNIT button as number 1 is selected automatically. If password entry has failed, [Error] appears on the display. The display returns to [LogIn]. q Log Out 1. Press the MON/ESC and CAM/SET buttons for about 2 seconds simultaneously. 2. [LogIn] appears on the display and the LOGIN indicator goes off. 3. Disconnect the DC plug from the controller, and remove the AC adapter from the AC outlet. Note: If the power is not turned off after logout, the alarm indicator and alarm suspend indicator will display the same status as in normal operation. SSEETT ESC Ready for user password entry User password entry Blink SET Authorized Certification off The unit that is assigned to the UNIT A/UNIT button as number 1 is selected automatically. OPERATE LOGIN ALARM Lights after authorization Goes off after logout Unauthorized 23