Panasonic WVCU360C WVCU360C User Guide - Page 26
Camera Control, Pan/Tilt Control, Lens Control, Home/Preset Position
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
s Camera Control Cameras and their peripherals are controlled from the WVCU360C as follows. Some of the descriptions may not be applicable if they refer to devices not equipped in your system. The operating procedures on the following pages assume that you have selected a system unit and a monitor. q Pan/Tilt Control Proceed as follows to control a combination camera or an ordinary camera mounted on a pan/tilt head. 1. Move the pan/tilt head in the desired direction with the joystick controller. Joystick 2. Press the ZOOM TELE button to optically bring the object closer, or press the ZOOM WIDE button to optically widen the scene. WIDE ZOOM TELE 3. Press the IRIS CLOSE button to close the iris, or the IRIS OPEN button to open the iris. If the IRIS CLOSE and IRIS OPEN buttons are pressed simultaneously, the iris is reset to the default. IRIS CLOSE OPEN IRIS RESET q Home/Preset Position The camera moves to the preset position or back to the home position, and the picture of the camera in that position appears on the monitor. 1. Press the HOME/PRESET button to move the camera back to the home position. HOME/PRESET 2. To slowly move the pan/tilt head, move the joystick while holding down the SLOW button. SEQ PAUSE SLOW PROGRAM PRESET 2. Select a preset position number using the numeric buttons, then press the HOME/PRESET button to move the camera to the position. q Lens Control This allows you to control a motorized lens. 1. Press the FOCUS NEAR or FOCUS FAR button to adjust the lens focus while watching the monitor. If you are using a camera with an auto focus feature, the lens focus can be automatically adjusted by pressing the FOCUS NEAR and FOCUS FAR buttons simultaneously. FOCUS NEAR FAR AUTO FOCUS 26 MON CAM ESC LOGOUT SET HOME/PRESET PROGRAM PRESET