Panasonic WVCU360C WVCU360C User Guide - Page 49
Alarm Operation, Alarm Reset, Alarm Suspension, VTR (VCR) Control
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Note: Auxiliary control may be ignored while zooming, focusing or panning/tilting is in operation. s Alarm Operation When the WV-CU360C receives an alarm signal from the WJ-FS616/FS616C, the alarm indicator blinks. The alarm indicator changes from blinking to steady light when the alarm is automatically reset. The camera number appears in the camera section of the LED display. q Alarm Reset 1. Press the ALM RESET button while the ALT indicator is not lit. An activated alarm is reset and the alarm indicator on the controller goes off. ALM RESET ALL RESET 2. To reset all alarms issued by the multiplexers connected in a daisy chain, press the ALT button, then press the ALM RESET buttons. s VTR (VCR) Control You can operate a VTR (VCR) connected to the Video Multiplexer from the controller using the buttons listed below with the ALT indicator lit. Function Rewind Pause Fast Forward Reverse Play Stop Playback T/L (timelapse) Mode Down Up Recording Logo Note e.g., change from 72H mode to 24H mode e.g., change from 24H mode to 72H mode q Alarm Suspension 1. Press the ALM SUSPEND button for more than 2 seconds to suspend the alarm. The ALM SUSPEND indicator lights up. ALM SUSPEND 2. Press the ALM RESET button to reset alarm suspension. The ALM SUSPEND indicator goes off. ALM RESET ALL RESET 50