Panasonic WVCU360C WVCU360C User Guide - Page 50
Camera Setup, General Setup, Shortcut for Preset Position Setup
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
s Camera Setup The cameras connected to the WJ-FS616/FS616C are set up from the controller. Note: Make sure that the multiplexer and the controller are set to identical communication parameters. q General Setup 1. Select a camera pressing the numeric buttons, then press the CAM/SET button. 2. Press the CAMERA SET ON button. The ON indicator is lit while the CAMERA SET UP MENU is displayed on the monitor. CAMERA SET ON OFF T/L MODE 3. Select a setup item by moving the joystick up and down. Select a parameter by moving the joystick to the right or left, then press the CAM/SET button to validate the selection or to enter a submenu. UP CAM L R SET DOWN 4. Press the UNIT/ESC button to execute the selection and to return the menu to a higher layer. UNIT ESC 5. Press the SEQUENCE button to enter the SPECIAL menu. 6. Press the VTR/CAM button to reset all functions to the defaults, or press the SEQUENCE button to reset a selected function. VTR CAM 7. Press the CAMERA SET OFF button to close the camera setup menu. CAMERA SET ON OFF T/L MODE q Shortcut for Preset Position Setup A shortcut can be created for setting a camera position without going through the whole presetting process. Shortcuts are applicable only to cameras having the presetting function. 1. Open the PRESET menu of the camera. 2. Press the ALT button while the position setting menu is displayed. 3. Move the camera with the joystick to the position you wish to preset. 4. Adjust the picture with the IRIS, FOCUS and ZOOM buttons. 5. Press the ALT button again. The preset conditions are registered, and the joystick function reverts to moving the cursor. SEQUENCE 51