Panasonic WVCU360C WVCU360C User Guide - Page 34

Item Copy to DVD Copy Cancel DVD Copy Record Display Controller Operation SETUP SHIFT FUNCTION SETUP SHIFT FUNCTION SETUP SHIFT FUNCTION Note Equal to EL-ZOOM s Alarm Operation When the WV-CU360C receives an alarm signal from a system unit, the alarm indicator on the controller blinks. The alarm indicator changes from blinking to steady light when the alarm is automatically reset. The camera number [---] appears in the camera section of the LED display. q Alarm Reset 1. Press the ALM RESET/ALM RECALL button. ALM RESET ALM RECALL The alarm indicator on the controller goes off. Notes: • Alarm reset operations including auto reset are applied to all system units, not to a selected one. • Alarm reset mode differs depending on the system unit connected to the WV-CU360C. • Confirm that the SHIFT button is released. q Alarm Suspension The alarm suspension mode is activated or deactivated. Use this function when you do not want to be disturbed by alarm input as for example during setup operations. 1. Press the ALM SUSPEND button. The ALM SUSPEND indicator lights up. Alarm input is ignored while the indicator is lit. ALM SUSPEND 2. To cancel alarm suspension, press the ALM SUSPEND button again. ALM SUSPEND Note: The alarm suspension is applied to all system units, not to a selected one. q Alarm Recall The alarm event log is recalled and displayed on the monitor. 1. Select the desired system unit and monitor. 2. Press the ALM RESET/ALM RECALL button while the SHIFT indicator is lit. The ALM RECALL indicator lights up. The alarm log appears on the monitor. ALM RESET SHIFT ALM RECALL 3. To cancel the alarm recall function, press the ALM RESET/ALM RECALL button while the SHIFT indicator is lit. 34