Panasonic WVCU360C WVCU360C User Guide - Page 37
Camera Preset Position, Home/preset/program Preset, Program/cam Setup/cam, Function, Program
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
s Camera Preset Position There are two ways of presetting camera positions. One is to use the camera setup menu of the combination camera and the other is to operate the System Controller as follows. 1. Select the desired system unit, monitor and camera. 2. Move the camera to a position you wish to preset, using the joystick. UP 4. Press the HOME/PRESET/PROGRAM PRESET button while holding down the PROGRAM/CAM SETUP/CAM FUNCTION button. The position and its number are memorized for later recall. PROGRAM CAM SETUP CAM FUNCTION HOME/PRESET PROGRAM PRESET L R DOWN Adjust the picture using the following buttons. • Iris (Open/Close) • Focus (Far/Near) • Zoom (Tele/Wide) Note: The memorized parameters may differ somewhat depending on the camera type. Refer to the manual included with the camera. 3. Type a number with the numeric buttons for the preset position. The typed number appears in the CAMERA section of the LED display. MON CAM ESC LOGOUT SET 37