Panasonic WVCU360C WVCU360C User Guide - Page 48
OPERATING PROCEDURES (For WJ-FS616/FS616C System), Camera Selection, Camera Control, Pan/Tilt Control
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
OPERATING PROCEDURES (For WJ-FS616/FS616C System) Note: For common operations to the controller and the WJ-FS616/FS616C, please refer to the manual included with the WJ-FS616/FS616C. The following pages describe only operations different from the WJ-FS616/FS616C. s Camera Selection One of the cameras connected to the system unit is selected. 1. Enter a camera number using the numeric buttons. The number appears on the LED display. 2. Press the CAM/SET button. UNIT ESC CAM SET CAM SET s Camera Control Cameras and their peripherals are controlled from the WVCU360C as follows. Some of the descriptions may not be applicable if they refer to devices not equipped in your system. q Pan/Tilt Control Proceed as follows to control an ordinary camera mounted on a pan/tilt head or a combination camera in manual or automatic panning mode. 1. Move the pan/tilt head in the desired direction with the joystick controller. UP L R Note: [--] appears in the camera section of the LED display when an alarm is activated, when the multiscreen is displayed, or when sequence mode is run. The following functions of the camera are controlled. • Pan/tilt • Focus • Zoom • Iris • Defroster ON/OFF (camera housing) • Wiper ON/OFF (camera housing) • Preset Position (Combination Camera) • Home position (Combination Camera) • Auto pan (Combination Camera) The following additional functions can be controlled when using the WV-CS854 or later camera models. • Switching between color and B/W picture (Combination Camera) • Patrol Learn function (Combination Camera) • Camera functions (Combination Camera) DOWN 2. Press the AUTO/+ button to activate a preset auto panning. q AUX Control This allows you to control an auxiliary device such as a buzzer or lamp connected to the Receiver or combination camera. 8 Auxiliary 1/2 1. Press the ALT button to turn on the ALT indicator . ALT AUTO/+ AUX 2 HOME/- AUX 1 2. Press the AUX 1 or AUX 2 button to operate or cancel the auxiliary function for the selected camera. 49