Panasonic WVCU360C WVCU360C User Guide - Page 60
OPERATING PROCEDURES (For WJ-SX350), Login & Logout, Login, Logout
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
OPERATING PROCEDURES (For WJ-SX350) This section describes only some important operations such as login, logout, and different operations from the front panel of the WJ-SX350. Please refer to the manual included with the WJ-SX350 for further information on camera selection, monitor selection and so forth. q Logout 1. Type 00 using the numeric button, then press the FUNCTION button. The LOGIN indicator turns off. FUNCTION s Login & Logout q Login 1. Type your registered operator number (a maximum of 15 digits) using the numeric buttons, then press the CAM/SET button. If login has been successful, the LOGIN indicator lights up. If it has failed, another attempt can be made when the PROHIBITED indicator goes off after 2 seconds. 1 2 3 4 5 6 7 8 9 MON CAM 0 ESC SET LOGIN 2. Type your registered password (a maximum of 5 digits) using the numeric buttons, then press the CAM/SET button. If password entry has been successful, the LOGIN indicator changes from blinking to steady light. If it has failed, another attempt can be made when the PROHIBITED indicator goes off after 2 seconds. 1 2 3 4 5 6 7 8 9 MON CAM 0 ESC SET LOGIN s Lens Control (Auto Focus Operation) The following function requires the use of a camera with auto focus capability, such as the Panasonic WV-CS854. 1. Select the desired monitor and camera. 2. Press the FOCUS NEAR and FAR buttons simultaneously to automatically adjust the lens focus on the selected camera. NEAR FOCUS FAR AUTO FOCUS s Pan/Tilt Control (Camera Position Operation) The following function requires the use of a camera with preset panning capability, such as the Panasonic WVCS854. 1. Select the desired monitor. 2. Select a registered camera position number using the numeric buttons. 3. Press the ALT button (indicator light on), then press the PRESET POSI button to activate the camera to move to the preset position. PRESET ALT POSI CAM POSI 62