Panasonic WVCU360C WVCU360C User Guide - Page 65
Joystick Controller UP/DOWN/L/R, Alarm button ALARM, Disarm indicator DISARM
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
o Joystick Controller (UP/DOWN/L/R) Used to manually operate the Pan/Tilt Head, or move the cursor in the camera menu on the active monitor screen. UP: Upward DOWN: Downward L: Left R: Right !0 Iris buttons (IRIS, CLOSE/OPEN) Closes or opens the lens iris of cameras equipped with the specified lens. When these buttons are pressed at the same time, the lens iris is reset to the factory default setting. !1 Focus buttons (FOCUS, NEAR/FAR) Adjusts the lens focus of cameras equipped with the specified lens. When these buttons are pressed at the same time, the lens focus is set automatically if the specified camera with the auto focus feature is equipped. !2 Zoom buttons (ZOOM, WIDE/TELE) Zoom the image in or out if the camera is equipped with the specified lens. !3 Programme Preset button (PROGRAM PRESET) In combination with the numeric buttons and CAMERA (ENTER) button, saves a preset position of the camera in a system equipped with the specified cameras. To save a preset position, move the camera to the position to be preset and select a preset number by pressing the numeric buttons. Hold down the PROGRAM PRESET button, then press the CAMERA (ENTER) button. !4 Call Preset button (CALL PRESET) In combination with the numeric buttons, moves the pan/tilt head of the selected camera to a preset position in a system equipped with the specified cameras. !5 Camera/Enter button [CAMERA (ENTER)] CAMERA: Used for camera selection. Select a camera by pressing the corresponding numeric buttons, followed by the CAMERA (ENTER) button. ENTER: In combination with the numeric buttons, enter numeric input, such as operator ID and password. It is also used to execute the currently highlighted selection and enter a submenu of the camera menu. Pressing CAMERA (ENTER) while holding down the SHIFT button will activate the auto panning function of the selected camera (AUTO PAN). !6 Clear/Escape button [CLEAR (ESC)] Clear: Clears numeric input from the LED display. Escape: Escapes from the currently highlighted selection and return to the previous page of the camera menu. This button is also used to exit from alarm selection mode to normal operation mode. !7 Numeric buttons (0 - 9) Used for numeric input into the system such as the camera and monitor number, sequence number, preset position, etc. Pressing the buttons shown below while holding down the SHIFT button will select special functions. 1: Turns off the user auxiliary 1 switch of the receiver. (AUX1 OFF) 2: Turn on the user auxiliary 1 switch of the receiver. (AUX1 ON) 3: Turns on the housing wiper of the camera until these buttons are released. (WIPER) 4: Turns off the user auxiliary 2 switch of the receiver. (AUX2 OFF) 5: Turns on the user auxiliary 2 switch of the receiver. (AUX2 ON) 7: Turns off the housing defroster of the camera. (DEF OFF) 8: Turns on the housing defroster of the camera. (DEF ON) !8 Shift button (SHIFT) Pressing this button in combination with buttons to which a special function has been assigned will activate these functions. !9 Alarm button (ALARM), Disarm indicator (DISARM) In combination with the Numeric buttons, selects an alarm. To select an activated alarm, press the numeric buttons, followed by the ALARM button. Pressing this button repeatedly enables or disables the cameras and monitor assigned to perform the alarm activities. The DISARM indicator next to the button is lit while alarm activities are disabled. @0 Alarm Acknowledge button (ACK) Acknowledge an activated alarm. Select the alarm by pressing the numeric buttons, followed by the ALARM button. Select the desired alarm action number by pressing the numeric buttons, then press the ACK button. The ACK indicator will light. After acknowledging the alarm, press the RESET button to reset the alarm. The ACK indicator will go off. 67