Panasonic WVCU360C WVCU360C User Guide - Page 45
SETUP PROCEDURES (For WJ-FS616/FS616C), Prior to Setup, Buttons and Controls used for Setup
UPC - 791871503454
View all Panasonic WVCU360C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
SETUP PROCEDURES (For WJ-FS616/FS616C) To display the setup menus for the WV-CU360C System Controller on the LED display, set the MODE switch and power up the controller as described below. s Prior to Setup Do the following before entering the setup mode. 1. Confirm that all necessary connections and switch settings are complete. 2. With the power turned off, move bit #6 of the MODE switch on the rear to ON (administrator) position. 3. Supply power to the controller. 4. Turn on the power of cameras and other system units. 5. The LCD displays [SEtUP]. The controller is ready to enter the setup mode. When setup is completed, restore the switch to its original position. 1. With the power turned off, move bit #6 of the MODE switch on the rear to OFF (operator) position. 2. Supply power to the controller. s Buttons and Controls used for Setup The following buttons and joystick operations are used for setup. 0 9 Numeric buttons: To select a parameter CAM CAM/SET button: To execute modes and parameters SET To enter a submenu UNIT UNIT/ESC button: To return to the previous menu ESC L R DOWN UP L R Up: To select a setup menu Down: To select a setup menu UP R or DOWN UP L R or DOWN HOME/AUX 1 Left: To decrease the parameter AUTO/+ AUX 2 Right: To increase the parameter 46