Pioneer AVH-X8500BHS Owner's Manual - Page 13

HD Radioä tuner HD Radioä tuner 1 Display the preset channel list screen. Refer to HD Radio tuner operations on page 12. The preset channel list appears in the display. 2 Touch BSM to turn BSM on. The six strongest broadcast frequencies will be stored under preset channel keys in order of their signal strength. # To cancel the storage process, touch Cancel. # The tag information for up to 50 songs can be stored on this unit. # Depending on the timing of when the tag information is stored, the tag information for the song played before or after the currently playing song may also be stored. # If an SD is selected as the source while tag information is being stored to this unit, the tag information will not be transferred to the iPod. Tuning in to strong signals Local seek tuning allows you to tune in to only those radio stations with sufficiently strong signals for good reception. FM: Off - - - - AM: Off - - The more there are on the screen, the fewer the stations that can be selected. Only stations with the strongest signals in your local area can be selected. If there are fewer , this unit will be able to receive broadcasts from weaker stations. 3 When completed, indicator turns off and indicator is displayed. Storing the tagged information to your iPod 1 Connect your iPod. When your iPod is connected to this unit, your iPod starts storing the tagged information automatically. # While transferring the tag, you cannot select the SD source. 2 When completed, indicator turns off and the tagged information is stored on your iPod. Using iTunes tagging For more details about iTunes tagging, refer to About iTunes tagging on page 65. Storing the tag information to this unit 1 Tune in to the broadcast station. Switching the seek mode There are two seek tuning settings, one is HD (Digital broadcasting stations seek) and the other is ALL (normal seek). ALL-HD 2 Store the tag information to this unit. Refer to HD Radio tuner operations on page 12. You can store the information if the Tag indicator is displayed while the desired song is being broadcast. # While storing the tag data on this unit, Tag flashes. Switching the reception mode If the reception for a digital broadcast becomes poor, this unit automatically switches to the analog broadcast of the same frequency. If this function is set to D/A AUTO, the tuner switches between digital broadcast and analog broadcast automatically. If this function is set to ANALOG, the tuner will only receive analog broadcasts. D/A AUTO-ANALOG Section 06 En 13 English