Ricoh Aficio SP 4310N Manuals - Page 105
Press [Exit]., Enter the Pre-Shared Key using between 8 and 63 ASCII characters.
View all Ricoh Aficio SP 4310N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Setting Security Method of Wireless LAN WPA uses CA certificates and a RADIUS server to provide secure wireless communication. • [WPA2-PSK] As with WPA-PSK, authenticate using the encryption key (a Pre-Shared Key) shared by the access point and client. Enter Pre-Shared Key using between 8 and 63 ASCII characters. • [WPA2] WPA2 is an expanded version of WPA that fully supports IEEE 802.11i. Wait for two seconds, the display returns to the [WPA] menu. 10. If [WPA] or [WPA2] is selected in step 9, a confirmation message appears. Press [OK]. Wait for two seconds. The display returns to the [WPA] menu, proceed to step 15. 11. If [WPA-PSK] or [WPA2-PSK] is selected in step 9, enter the Pre-Shared Key, and then press the [OK] key. 5 • When entering a character, pressing the [OK] key will mask it with an asterisk for security reasons. • Enter the Pre-Shared Key using between 8 and 63 ASCII characters. • Uppercase and lowercase letters are differentiated, so be sure to enter characters in the required case. • Wait for two seconds. The display returns to the [Authentication Method] menu. 12. Press the [Escape] key. 13. Press [Exit]. 14. Press the [ ] or [ ] key to select [WPA], and then press the [OK] key. 15. Press the [Menu] key to return to the initial screen. 16. Print a configuration page to confirm the settings. • For details about printing the configuration page, see p.45 "Test Printing". 103