Ricoh Aficio SP 4310N Manuals - Page 92
Ethernet II, Ethernet 802.2, Ethernet SNAP, preferred frame type.
View all Ricoh Aficio SP 4310N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5. Configuration • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP • Usually, you can use the default (Auto Select). When you first select [Auto Select], the frame type detected by the printer is adopted. However, if your network can use more than two frame types, the printer may fail to select the correct frame type with [Auto Select] selected. In this case, select the preferred frame type. 1. Press the [Menu] key. 5 CEE128 2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key. 3. Press the [ ] or [ ] key to select [Network], and then press the [OK] key. 4. Press the [ ] or [ ] key to select [NW Frame Type], and then press the [OK] key. 90
•
Ethernet II
•
Ethernet 802.2
•
Ethernet 802.3
•
Ethernet SNAP
•
Usually, you can use the default (Auto Select). When you first select [Auto Select], the frame type
detected by the printer is adopted. However, if your network can use more than two frame types, the
printer may fail to select the correct frame type with [Auto Select] selected. In this case, select the
preferred frame type.
1.
Press the [Menu] key.
CEE128
2.
Press the [
] or [
] key to select [Host Interface], and then press the [OK] key.
3.
Press the [
] or [
] key to select [Network], and then press the [OK] key.
4.
Press the [
] or [
] key to select [NW Frame Type], and then press the [OK] key.
5. Configuration
90
5