Ricoh Aficio SP 4310N Manuals - Page 67
is installed., Tighten the two screws to secure the Gigabit Ethernet board.
View all Ricoh Aficio SP 4310N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installing the Interface Units 3. Disconnect the cables from the Ethernet port and the USB port of the printer, and cover each port with its protective cap. 3 CEE143 4. Remove the two screws and remove the cover of the slot in which the Gigabit Ethernet board is installed. CEE144 5. Fully insert the Gigabit Ethernet board. CEE146 6. Tighten the two screws to secure the Gigabit Ethernet board. Check the Gigabit Ethernet board is connected firmly to the interface board slot. 65
3.
Disconnect the cables from the Ethernet port and the USB port of the printer, and cover each
port with its protective cap.
CEE143
4.
Remove the two screws and remove the cover of the slot in which the Gigabit Ethernet board
is installed.
CEE144
5.
Fully insert the Gigabit Ethernet board.
CEE146
6.
Tighten the two screws to secure the Gigabit Ethernet board.
Check the Gigabit Ethernet board is connected firmly to the interface board slot.
Installing the Interface Units
65
3