Samsung NX58R5601SS/AA User Manual - Page 74
Troubleshooting, English, PROBLEM, POSSIBLE CAUSE, SOLUTION, You smell gas., The range is, not level.
View all Samsung NX58R5601SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Troubleshooting Troubleshooting After self-cleaning CAUTION Be careful opening the oven door after a self-cleaning cycle. The oven is still very hot when the door unlocks. Escaping hot air and/or steam could burn you. • The internal oven temperature must be below 350 °F for the automatic door lock to disengage. The door lock must be disengaged before another cooking function can be set. • After the oven has cooled, wipe down the oven surfaces with a damp cloth to remove any ash residue. • Stubborn spots can be cleaned with a soap-filled steel-wool pad. Lime deposits can be removed with a cloth soaked in vinegar. Rinse thoroughly after cleaning. • If the oven is not clean after one cycle, repeat the cycle. If the oven is still hot, HOT will appear on the display until the oven is cool enough to start a new cycle. • Self-cleaning does not operate within 2 hours after running the self-cleaning cycle. Troubleshooting Samsung works hard to ensure that you don't have problems with your new gas range. If you experience a problem, look first for a solution in the table below. If, after trying the suggested solution, you're still having trouble, call Samsung at 1-800-SAMSUNG (726-7864). PROBLEM You smell gas. The range is not level. POSSIBLE CAUSE SOLUTION There is a gas leak. The surface burner knob is not in the 'off' position, yet the burner itself is not ignited. Clear the room, building, or area of all occupants. Immediately call your gas supplier from a neighbor's phone. Do not call from your phone. It is electrical and could cause a spark that could ignite the gas. Follow the gas supplier's instructions. If you cannot reach your gas supplier, call the fire department. The appliance has been installed improperly. The leveling leg(s) is (are) damaged or uneven. Make sure the floor is level, strong, and stable. If the floor sags or slopes, contact a carpenter. Check and level the range. (See the Installation Instructions.) The kitchen cabinets are not properly aligned and make the range appear to be not level. Ensure that cabinets are square and provide sufficient room for installation. Troubleshooting 74 English