Samsung NX58R5601SS/AA User Manual - Page 75
POSSIBLE CAUSE, Press the OFF/CLEAR pad
View all Samsung NX58R5601SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
PROBLEM The oven control beeps and displays an error code. All burners do not light. Surface burners do not light. POSSIBLE CAUSE SOLUTION You have a function error code. See the Troubleshooting and information codes chart on page 80. Press the OFF/CLEAR pad and restart the oven. If the problem persists, disconnect all power to the range for at least 30 seconds and then reconnect the power. If this does not solve the problem, call for service. The power cord is not plugged into the electrical outlet. Make sure the electrical plug is plugged into a live, properly grounded outlet. A fuse in your home may be blown or the circuit breaker tripped. Replace the fuse or reset the circuit breaker. The gas supply is not properly See the Installation connected or turned on. Instructions that came with your range. The control knob is not set properly. Push in the control knob and turn it to the LITE position. The burner caps are not in place. The burner base is misaligned. Clean the electrodes. Put the burner cap on the burner head. Align the burner base. PROBLEM Surface burner clicks during operation. The burners do not burn evenly. Very large or yellow surface burner flames. Surface burners light but oven burners do not light. POSSIBLE CAUSE SOLUTION The control knob has been left After the burner lights, turn in the LITE position. the control knob to a desired setting. If the burner still clicks, contact a service technician. Surface burner components and caps are not assembled correctly and level. See page 64. Surface burners are dirty. Clean surface burner components. (See pages 64 and 65.) Wrong orifice is assembled. Contact your installer. Check the burner orifice size and contact your installer if you have the wrong orifice. Check the LP gas conversion. The oven door lock is turned on. The display will show the Lock icon. Hold the oven door open and press the START/ SET pad for 3 seconds. The oven will beep and the Lock icon will turn off. Gas Pressure Regulator shut off switch is in the 'off position. Call a qualified service technician. Troubleshooting English 75