Sharp MX-M850 Quick Start Guide - Page 42

FINISHING You can touch the [Output] key to select output functions such as the sort function, group function, and offset function, and to select the output tray. All settings that can be selected when the finisher, punch unit, saddle unit, and folding unit are installed are explained. (7) Output (1) Top Tray (2) Offset Tray (3) Offset (4) Sort (5) Staple Sort (6) Group Saddle Stitch (8) OK (9) Fold 2 Hole Punch 3 Hole Punch (10) (11) (1) [Top Tray] key Output is delivered to the top tray. When the top tray is selected, the offset, staple sort, and saddle stitch functions cannot be used. (2) [Offset Tray] key Output is delivered to the offset tray. When the [Staple Sort] key is selected, the [Offset Tray] key is automatically selected. (3) [Offset] key This is used to offset each set of output from the previous set. The offset function operates when the checkbox is selected and does not operate when the checkbox is not selected . (4) [Sort] key This is used to sort (collate) output into sets. (5) [Staple Sort] key This is used to sort output into sets, staple each set, and deliver the sets to the tray. (Note that the sets will not be offset in the output tray.) When this function is selected, three keys will appear for selecting the staple position. (6) [Group] key This is used to group copies by page. (7) Output display An icon will appear to indicate the output mode. (8) [OK] key Touch this key to close the output screen and return to the base screen. (9) [Fold] key This folds the output in half. (10) [2 Hole Punch] key, [3 Hole Punch] key Holes can be punched in output. (11) [Saddle Stitch] key This is used to staple and fold each set of copies at the centreline. 40