Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 109
OptionX/InputX
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 4 Operations Input Port: Displays Input Port and Input No. set in the Channel Configuration menu. RGB Range: Displays RGB Range set in the Channel Configuration menu. 1080I/PsF: Displays 1080I/PsF set in the Channel Configuration menu. Scan Mode: Displays the selected scan mode. Aspect Mode: Displays the selected aspect ratio. Interlace Display: Displays On/Off of the interlace display. Page 2/4 Information on the picture adjustments is displayed. STATUS (Picture Configuration) CH01 Color Profile: BVM EBU Color Space: EBU Gamma: CRT BVM Color Temp: User1 2/4 v V Picture Preset: Chroma: Bright: Contrast: Matrix: Preset1 1000 000 1000 ITU-R BT.709 Color Profile: Displays Color Profile set in the Channel Configuration menu. Color Space: Displays Color Space set in Color Profile Gamma: Displays Gamma set in Color Profile Color Temp: Displays Color Temp set in the Channel Configuration menu. Picture Preset: Displays Picture Preset set in the Channel Configuration menu. Chroma: Displays the Chroma value of the selected Picture Preset. Bright: Displays the Bright value of the selected Picture Preset. Contrast: Displays the Contrast value of the selected Picture Preset. Matrix: Displays Matrix set in the Channel Configuration menu. Page 3/4 Information on the ASC CDL and User LUT is displayed. STATUS (ASC CDL, User LUT) CH01 3/4 v V ASC CDL: Applied File: project 23 Slope (R/G/B): 0.123 0.000 0.000 Offset (R/G/B): -0.456 0.000 0.000 Power (R/G/B): 0.000 0.000 0.000 Saturation: 0.000 User LUT: Applied File: Slog2Film Color Space: D-Cine Gamma: 2.6 ASC CDL: Displays whether the ASC CDL data is applied to the Color Profile setting or not. File: Displays the file name of the specified ASC CDL data. Slope (R/G/B): The slope values of the ASC CDL data are displayed, in order of R, G, and B, starting from the left. Offset (R/G/B): The offset values of the ASC CDL data are displayed, in order of R, G, and B, starting from the left. Power (R/G/B): The power values of the ASC CDL data are displayed, in order of R, G, and B, starting from the left. Saturation: The saturation values of the ASC CDL data are displayed. User LUT: Displays whether the User LUT data is applied to the Color Profile setting or not. File: Displays the file name of the specified User LUT data. Color Space: The color space specified in the User LUT data file is displayed. Gamma: The gamma specified in the User LUT data file is displayed. Page 4/4 When the SDI signal is input The same information as that of SDI Payload ID Status in the System Status menu is displayed. STATUS (SDI Payload ID) Option1/Input1 4/4 v V Payload ID B1 B2 B3 B4 Video Standard: HD-SDI Sampling Structure: 4:2:2 Y/Cb/Cr Bit Depth: 10bit Picture Rate: 59.94 Scannin:g Method Interlace/Interlace Link Number: Single/Link_1 Current Status Format: HD 422 YCbCr 10 I/PsF/P: Interlace OptionX/InputX: Input port and input connector of the displayed information Standard or Option1 to 4 is displayed as an input port, and Input1 or Input2 is displayed as an input connector. Payload ID: Displays the 4-byte data for Payload ID of the SMPTE-352M standard in hexadecimal in sequence of Byte 1, Byte 2, Byte 3 and Byte 4. When the Payload ID information is not set, only Current Status is displayed, and "---" is displayed for other items. When the following information is not decoded, Unknown is displayed. Video Standard: Decode display of Byte 1_Bit 6-0 Sampling Structure: Decode display of Byte 3_Bit 3-0 Bit Depth: Decode display of Byte 4_Bit 1-0 Picture Rate: Decode display of Byte 2_Bit 3-0 109 Displaying the Monitor Status Page