Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 57
Color Temp Adj, Restore factory data?, Cancel, Position Adj
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Color Temp Adj Menu Restore Factory Data Position Adj H Shift V Shift Function and operation ([ ]: factory setting) Resets the color temperature to the default setting. You cannot select this when the setting is the default value. The following message appears to confirm the data reset operation. Restore factory data? OK: To reset the data, press the ENTER (Ent) button. Cancel: To cancel, press the MENU button. Adjusts the position of the picture when the analog signal is input. When the item is selected, the signal system to be set is displayed. You can select the item when the composite or Y/C signal from the BKM-227W, or the analog component or analog component RGB signal from the BKM-229X is displayed. To hide the characters on the monitor during adjustment Set the CHAR OFF button of the controller to on. As the characters on the display are hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF button to off. Note This menu is not selectable when the internal signal or captured frame is displayed. Adjusts the horizontal position of the picture. As the setting increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. [000] Set in the H Shift Offset menu (page 64) of the Channel Configuration menu when the difference of the horizontal position is necessary to adjust for different input signals of the same signal system, etc. Adjusts the vertical position of the picture. As the setting increases, the picture moves up, and as the setting decreases, the picture moves down. [000] Chapter 3 Menu 57 Adjustment Menu