Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 113
Upgrading the Controller, When a version earlier than 1.2 of
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 4 Operations After completion of upgrading, the display on the screen disappears, and the system is restarted. After restarting, the previous screen is displayed. 6 Select the Monitor Upgrade menu in the System Configuration menu and confirm that the version of the selected item has been upgraded. When the upgrade sequence does not move forward correctly, the message such as "Procedure failure" is displayed in red. If this error message is displayed, contact your Sony representative. Upgrading the Controller 1 Insert the "Memory Stick PRO" into the Memory Stick insertion slot of the controller. 2 Select the Controller Upgrade menu in the Controller menu (page 95). 3 Enter the 4-digit password. The Controller Upgrade screen is displayed, and the current version is indicated. For the password, see Password (page 84) of the System Configuration menu. 4 Select the item to upgrade from Software Upgrade or Kernel Upgrade. After about 10 seconds, the old and new software versions or kernel version, and the message to confirm that you wish to execute the upgrade are displayed. Display example Controller software will be upgraded and controller will restart. Are you sure? 5 Confirm the data version and press the ENTER (Ent) button. Upgrading starts. When a version earlier than 1.2 of the software for the controller is upgraded When upgrading starts, the dot (indicator) lights as moving from left to right in the display window of the controller. The dot may stop during upgrading, but the data are being upgraded correctly. REMOTE SINGLE GROUP ALL SINGLE GROUP ALL When version 1.2 or later of the software for the controller is upgraded When the upgrading starts, the indicator lights as turning clockwise in the display window of the controller. The indicator may stop during upgrading, but the data are being upgraded correctly. Upgrading takes about 2 minutes for the software program and about 1 minute for the kernel. After upgrading, all indicators light for about 1 second. REMOTE SINGLE GROUP ALL SINGLE GROUP ALL Notes • Do not remove the "Memory Stick PRO" from the Memory Stick insertion slot during upgrading or disconnect the LAN cable between the monitor and controller. • Do not turn off the power of the monitor and controller during upgrading. After completion of upgrading, the system is restarted. The network between the monitor and controller is reconnected, and you can operate the controller. When the upgrade sequence does not move forward correctly, the error message "Err" is displayed in the display window. If this error message is displayed, contact your Sony representative. 113 Upgrading the Monitor and Controller