Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 63

Chapter 3 Menu Color Profile Menu Color Space (BVM-E250A) Color Space (BVM-E170A) Gamma ASC CDL Function and operation ([ ]: factory setting) Select the color space when User CHXX is selected in the Color Profile menu. SMPTE-C: Color space of three primary color chromaticity points provided by the SMPTE-C standard EBU: Color space of three primary color chromaticity points provided by the EBU standard ITU-R BT.709: Color space of three primary color chromaticity points provided by the ITU-R BT.709 standard D-Cine2): Color space of three primary color chromaticity points provided by SMPTE RP 431-2 E250 Native: Color space of the BVM-E250A individual three primary color chromaticity points S-GAMUT: Color space of the wide color space mode S-GAMUT for F23 or F35 Digital Cinematography Camera 2) Three primary color chromaticity points provided by SMPTE RP 431-2 are not covered in full. Select the color space when User CHXX is selected in the Color Profile menu. SMPTE-C: Color space of three primary color chromaticity points provided by the SMPTE-C standard EBU: Color space of three primary color chromaticity points provided by the EBU standard ITU-R BT.709: Color space of three primary color chromaticity points provided by the ITU-R BT.709 standard D-Cine2): Color space of three primary color chromaticity points provided by SMPTE RP 431-2 E170 Native: Color space of the BVM-E170A individual three primary color chromaticity points S-GAMUT: Color space of the wide color space mode S-GAMUT for F23 or F35 Digital Cinematography Camera 2) Three primary color chromaticity points provided by SMPTE RP 431-2 are not covered in full. Select the gamma when User CHXX is selected in the Color Profile menu. CRT BVM: Gamma curve of the BVM-D or BVM-A series 2.2: Gamma curve 2.2 2.4: Monitor gamma provided by ITU-R BT.1886 2.6: Gamma curve 2.6 S-LOG Standard: Log gamma available with the F23 or F35 Digital Cinematography Camera Select to run 100% output level of the camera with the 100% level of the monitor for confirmation. S-LOG Full: Log gamma available with the F23 or F35 Digital Cinematography Camera Select to fit the full dynamic range of the camera in the 100% level of the monitor for confirmation. Notes • The gamma is preset to 2.4 that is provided by ITU-R BT.1886, at the factory. With this setting, dark portions may be seen darker than with conventional CRT or LCD monitors. If you wish to obtain the same gamma as that when using a conventional CRT or LCD monitor, set this item to CRT BVM or 2.2. If blocked-up shadows are seen, adjust the brightness for optimum viewing of black portions. • The Gamma setting is fixed at 2.6 when an XYZ format signal is input. • The factory preset black luminance of the CRT BVM setting in the Gamma menu is the same as the factory preset value for a BVM-D or BVM-A series monitor. • Adjust the brightness (black level) according to the ambient light and the black level of the image to be reproduced. Adjust the contrast (white level) according to the ambient light. Sets whether or not to apply the ASC CDL data for the Color Profile setting. [Not Applied]: The ASC CDL data is not applied. Applied: The ASC CDL data is applied. Note When the ASC CDL data selected with the File menu is deleted using Delete ASC CDL (page 67) in the ASC CDL menu of the Auxiliary Setting menu, the setting for this item is automatically switched from Applied to Not Applied. 63 Channel Configuration Menu