Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 79
When Peak Hold is set to Off or Auto in the Audio Level Meter menu of the On Screen Set
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 3 Menu Function Switch Menu Error Notify Clear Audio Level Meter ALM Hold Reset Time Code Difference Checkerboard Function and operation ([ ]: factory setting) When the item is selected, the notification of the gamut error detection (OSD Notification) is cleared. Note The Error Notify Clear is not selected in the following cases: • When Gamut Error Display is set to Off in the Gamut Error Display menu of the Function Setting menu. • When OSD Notification Reset is set to Auto in the Gamut Error Display menu of the Function Setting menu. Sets whether or not to display the audio level meter ([Off] or On). Note When the option port number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu, the audio level meter cannot be displayed. When the item is selected, the peak hold of the audio level meter is canceled. Note The ALM Hold Reset is not selected in the following cases: • When the option slot number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu • When Audio Level Meter is set to Off • When Peak Hold is set to Off or Auto in the Audio Level Meter menu of the On Screen Set menu of the System Configuration menu Sets whether or not to display the time code ([Off] or On). Sets whether or not to display the difference between the luminance of the left 3D video signal and that of the right signal ([Off] or On). This item is available for dual-stream HD-SDI signals. Notes • The Difference display cannot be set in the following cases: - When the option port number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu - When dual-link display is used - When the internal signal is displayed - When a captured frame is displayed - When Side by Side, Wipe, Butterfly or Blending is set to On • The Difference display may not be performed correctly when H Delay is set to On. • If saving is performed in HD Frame Capture, this function is deactivated and the normal display is restored. Sets whether or not to display the left and right 3D video signals in a checkerboard pattern ([Off] or On). This item is available for dual-stream HD-SDI signals. Notes • The Checkerboard display cannot be set in the following cases: - When the option port number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu - When dual-link display is used - When the internal signal is displayed - When a captured frame is displayed - When Side by Side, Wipe, Butterfly or Blending is set to On • The Checkerboard display may not be performed correctly when H Delay is set to On. • If saving is performed in HD Frame Capture, this function is deactivated and the normal display is restored. 79 Function Setting Menu