Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 58
Channel Configuration Menu, Overview, Menu Function and Operation
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 3 Menu Channel Configuration Menu Overview This menu is used for pertaining data to the input signals. When Channel Configuration is selected, the following menus are displayed. iChannel Configuration CH01 Format B Input Port: xxxxx Input No: xxxxx Screen Aspect B Sync Mode: xxx Color Temp: Picture Preset: Matrix Color Profile xxx xxxxx B B 1/3 v V iChannel Configuration CH01 Marker Preset: xxxxx H Shift Offset: xxx Channel Name B NTSC Setup Level:: xx Component Level: xxxxx Betacam Setup Level:: xxx RGB Range: B 1080I/PsF B Film Cadence:: xxx 2/3 v V iChannel Configuration CH01 Copy From B 3/3 v V The current channel is displayed. Perform the input setting for the selected channel. Before setting Set the input signal for each channel. A channel number (1 to 30) is entered with the numeric buttons (page 43). Note This menu is not selectable in the following cases: • When Side by Side is set to On • When Wipe is set to On • When Butterfly is set to On • When Blending is set to On Menu Function and Operation Menu Format 3G/HD/SD-SDI Function and operation ([ ]: factory setting) Sets the input signal type. Note The default setting is 3G/HD/SD-SDI Auto. Sets the serial digital signal format (Single-link 3G-SDI, HD-SDI or SD-SDI). 3G/HD/SD-SDI Auto: Changes the format automatically according to the Sampling Structure, Bit Depth, Picture and transport scanning method information for Payload ID of SMPTE-352M standard superimposed on the input signals. Note You can confirm the Payload ID information and the signal format status of the current monitor in "SDI Payload ID Status" (page 90) of the System Status menu or using the Status button on the controller. For details on the display using the Status button, see "Displaying the Monitor Status Page" (page 108). 3G-SDI: Sets the signal format. 4:2:2 YCbCr 10bit 4:4:4 YCbCr 10bit 4:4:4 RGB 10bit 4:4:4 YCbCr 12bit 4:4:4 RGB 12bit 4:4:4 XYZ 12bit HD/SD-SDI Auto: Changes the format automatically according to the format of the input signal. SD-SDI 58 Channel Configuration Menu