Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 112

Chapter 4 Operations ... • MSSONY/MONITOR/BVM_E/UPDATES/DP/BVM_E 250/checksum_dp.bat • MSSONY/MONITOR/BVM_L/UPDATES/SOFT/BKM _16R/checksum_soft.bat • MSSONY/MONITOR/BVM_L/UPDATES/KERNEL/B KM_16R/checksum_kernel.bat BVM-E170A • MSSONY/MONITOR/BVM_E/UPDATES/SOFT/BVM _E170/checksum_soft.bat • MSSONY/MONITOR/BVM_E/UPDATES/KERNEL/B VM_E170/checksum_kernel.bat • MSSONY/MONITOR/BVM_E/UPDATES/FPGA/BVM _E170/checksum_fpga.bat • MSSONY/MONITOR/BVM_E/UPDATES/DP/BVM_E 170/checksum_dp.bat • MSSONY/MONITOR/BVM_L/UPDATES/SOFT/BKM _16R/checksum_soft.bat • MSSONY/MONITOR/BVM_L/UPDATES/KERNEL/B KM_16R/checksum_kernel.bat Display example To confirm the upgrade data of the kernel of the BVME250A, double-click: MSSONY/MONITOR/BVM_E/UPDATES/KERNEL/B VM_E250/checksum_kernel.bat When the data are saved correctly E:\MSSONY\MONITOR\BVM_E\UPDATES\KERNEL\BVM_E250>check_data\\checksum -c check_da ta\\checksum_table -f vxWorks_rom.bin -f version * * * check 2 files Ok * * * * Success * * * E:\MSSONY\MONITOR\BVM_E\UPDATES\KERNEL\BVM_E250>pause ... "Success" is displayed. When the data are not saved correctly E:\MSSONY\MONITOR\BVM_E\UPDATES\KERNEL\BVM_E250>check_data\\checksum -c check_da ta\\checksum_table -f vxWorks_rom.bin -f version "vxWorks_rom.bin" check : Error!!! * * * 1 file error * * * * Error * * * E:\MSSONY\MONITOR\BVM_E\UPDATES\KERNEL\BVM_E250>pause Upgrading the Monitor 1 Insert the "Memory Stick PRO" into the Memory Stick insertion slot of the controller. 2 Select the Monitor Upgrade menu in the System Configuration menu (page 86). 3 Enter the 4-digit password. The Monitor Upgrade screen is displayed, and the current version is indicated. For the password, see Password (page 84) of the System Configuration menu. 4 Select the item to upgrade from among Software Upgrade, Kernel Upgrade, FPGA Upgrade, and DisplayPort Upgrade. After about 10 seconds, the old and new software versions, kernel version or DisplayPort version, and the message to confirm that you wish to execute the upgrade are displayed. When FPGA Upgrade is selected, the old and new versions of FPGA1, FPGA2, FPGA CORE, starting from the left, and a confirmation message are displayed. Display example Monitor software will be upgraded and monitor will restart. Are you sure? 5 Confirm the data version and press the ENTER (Ent) button. Upgrading starts. The "In progress x" is displayed and "x" flashes during upgrading. The "x" indication may stop flashing during upgrading, but the data are being upgraded correctly. Upgrading takes about 8 minutes for the software program, about 2 minutes for the kernel, about 3 minutes for FPGA data, and about 2 minutes for DisplayPort data. Notes • Do not remove the "Memory Stick PRO" from the Memory Stick insertion slot during upgrading or disconnect the LAN cable between the monitor and controller. • Do not turn off the power of the monitor and controller during upgrading. "Error" is displayed. 112 Upgrading the Monitor and Controller