Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 116

Appendixes SD-SDI: Y/Cb/Cr (4:2:2) 13.5MHz/6.75MHz/6.75MHz Quantization 3G-SDI: 10 bit/sample, 12 bit/sample HD-SDI: 10 bit/sample SD-SDI: 10 bit/sample HDMI HDMI (×1) HDCP correspondence, Deep Color correspondence Signal format See "HDMI/DisplayPort" (page 130) of "Available Signal Formats". DisplayPort DisplayPort connector (×1) HDCP correspondence, 18/24/30bpp (bits per pixel) correspondence Signal format See "HDMI/DisplayPort" (page 130) of "Available Signal Formats". Option port Four (4) ports Signal format See "Available Signal Systems" (page 122) and "Available Signal Formats" (page 124). Parallel remote D-sub 9-pin (female) (×1) Serial remote (LAN) Ethernet (10BASE-T/100BASE-TX), RJ-45 (×1) Output SDI DC 5V OUT BNC (×1) (monitor output) Output signal amplitude: 800 mVp-p±10% Output impedance: 75 ohms unbalanced Transmission distance 3G-SDI: 70 m max.6) HD-SDI: 100 m max.6) SD-SDI: 200 m max.7) Note The signal from the monitor output connector does not satisfy the ON-LINE signal specifications. 6) When using the 5C-FB coaxial cable made by Fujikura Ltd. or equivalent 7) When using the 5C-2V coaxial cable made by Fujikura Ltd. or equivalent Circle 4-pin (female) (×1) General Power requirements 100 V to 240 V AC, 1.6 A to 0.8 A, 50/60 Hz Power consumption Approx. 145 W (max.) Approx. 72 W (average power consumption in the default status) Inrush current (1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 53 A peak, 17 A r.m.s. (240V AC) (2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 39 A peak, 6 A r.m.s. (240V AC) Operating temperature 0 °C to 35 °C (32 °F to 95 °F) Recommended: 20 °C to 30 °C (68 °F to 86 °F) Operating humidity 0% to 90% (no condensation) Storage/transport temperature -20 °C to +60 °C (-4 °F to +140 °F) Storage/transport humidity 0% to 90% Operating/storage/transport pressure 700 hPa to 1060 hPa Mass Approx. 13.0 kg (28 lb 11 oz) Supplied accessories AC power cord (1) AC plug holder (1) Operation Guide (Japanese/English) (1) CD-ROM (1) Optional accessories BKM-16R Monitor Control Unit BKM-37H/BKM-38H Controller Attachment Stand SMF-700 Monitor Interface Cable BKM-220D SDI 4:2:2 Input Adaptor (with serial number 2100001 or higher) BKM-227W NTSC/PAL Input Adaptor (with serial number 2100001 or higher) BKM-229X Analog Component Input Adaptor (with serial number 2200001 or higher) BKM-243HS HD/D1-SDI Input Adaptor (with serial number 2108355 or higher) BKM-244CC HD/SD-SDI Closed Caption Adaptor BKM-250TG 3G/HD/SD-SDI Input Adaptor (with serial number 7300001 or higher) Note An input adaptor with a specified serial number may be required for your intended use. 116 Specifications (BVM-E250A)