Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 43
Entering the Channel Number, Aborting Menu Operation, To correct the entered character
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
When you press the UP button or turn the PHASE knob clockwise, the characters and symbols appear in the sequence shown below. Capital letters (A t B t ....... t Y t Z) t Lowercase letters (a t b t ....... t y t z) t Numbers (0 t 1 t ....... t 8 t 9) t Marks t Capital letters... When you press the DOWN button or turn the PHASE knob counterclockwise, the characters and symbols appear in the reverse sequence described above. The usable symbols are limited depending on the menu. "(space)" is not used as a first character of a sentence. 4 Press the ENTER or Ent button. The selected character is entered. Display example iiChannel Name CH01 PROG___ EDIT___ CAM___ VTR___ PREV___ New Name C 094: Five-step gray scale signal 095: Ramp signal 096: color-bar signal 097: 0% black signal To cancel the internal signal, select one from the channel numbers 1 to 30. Note You cannot select channel numbers 91 to 97 in the following cases: • When the XYZ signal, or the computer signal of HDMI/ DisplayPort is input • When Side by Side is set to On • When Wipe is set to On • When Butterfly is set to On • When Blending is set to On • When Pixel Zoom is set to on Aborting Menu Operation Press the MENU button. The menu of the upper level is displayed. When the MENU button is pressed in setting mode or during adjustment, the menu returns to the previous setting. The menu disappears automatically if not operated for about one minute. Chapter 3 Menu 5 Repeat steps 3 and 4 until all the characters are entered, then press the ENTER or Ent button. The selected characters are confirmed and the display returns to the menu of the upper level. To correct the entered character Press the Del button. The character on the left side of the cursor is deleted. Entering the Channel Number When selecting a one-digit number, press the button of the channel number. When selecting a two-digit number, first press the 0 button, then press a two-digit channel number. Channel numbers 91 to 97 assignment The signal systems to which the internal signal is displayed are assigned to channel numbers 91 to 97. The internal signal of the last signal system is displayed. 091: PLUGE signal 092: 20% gray signal 093: 100% white signal 43 Basic Menu Operations