Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 99
Selecting the Native Scan/Scan Mode
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 4 Operations Selecting the Native Scan/Scan Mode You can select scan mode from a native scan, under scan (-3%), normal scan (0%) and over scan (mask of 5% over scan portion in the normal scan picture). You can set scan mode with the NATIVE SCAN button or SCAN button of the controller, or in the Function Switch menu of the Function Setting menu. Setting with the NATIVE SCAN button or SCAN button of the controller To set to the native scan mode Set the NATIVE SCAN button to on. (The LED on the button lights.) To select the scan mode 1 Set the NATIVE SCAN button to off. (The LED on the button is turned off.) 2 Press the SCAN button to select the scan mode. Scan mode is changed to normal, under and over scan mode by each press of the button. Setting in the menu Set Scan Mode or Native Scan in the Function Switch menu (page 75) of the Function Setting menu. iiFunction Switch Scan Mode: Native Scan: 16:9: H Delay: V Delay: External Sync:: Comb: xxx xxx xxx xxx xxx xxx xxx 1/5 v V Over Scan: Over mode Note The scan mode is not selectable in the following cases: • When Native Scan is set to On • When the internal signal is displayed • When Side by Side, Wipe, Butterfly or Blending is set to On To set to the native scan mode Set Native Scan to On. To select the scan mode 1 Set Native Scan to Off. 2 Select Scan Mode, then select scan mode from the following. Normal Scan: Normal mode Under Scan: Under mode 99 Selecting the Native Scan/Scan Mode