Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 94
Side by Side
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 3 Menu Function Key Menu Monitor ID Display Function and operation ([ ]: factory setting) Area Marker1: An area marker 1 is displayed on the screen. Area Marker2: An area marker 2 is displayed on the screen. Center Marker: The center marker is displayed on the screen. Aspect Marker-Line: The line of the aspect marker is displayed on the screen. Aspect Blanking-Half: Aspect Blanking is set to half blanking. Aspect Blanking-Black: The blanking level of Aspect Blanking is set to 0% black level. Note Use the controller with software version 1.6 or higher to assign Center Marker, Aspect Marker-Line, Aspect Blanking-Half or Aspect Blanking-Black to a function button of the controller. Side by Side: The screen is displayed in the side by side display mode. Wipe: The screen is displayed in the wipe display mode. Butterfly: The screen is displayed in the butterfly display mode. Blending: The screen is displayed in the blending display mode. Error Notify Clear: Clears the notification detected in the gamut error detection. (OSD Notification) Audio Level Meter: The audio level meter is displayed. ALM Hold Reset: The peak hold of the audio level meter is canceled. Time Code: The time code is displayed. Note Use the controller with software version 1.4 or higher to assign Audio Level Meter, ALM Hold Reset or Time Code to a function button of the controller. Difference: The difference between the luminance of the left 3D video signal and that of the right signal is displayed. Note Use the controller with software version 1.6 or higher to assign Difference to a function button of the controller. Checkerboard: The left and right 3D video signals are displayed in a checkerboard pattern. L/R Switch: The left and right 3D video signals are displayed alternately by switching. Note Use the controller with software version 1.5 or higher to assign Checkerboard or L/R Switch to a function button of the controller. Horopter Check: The left and right 3D video signals are displayed in the mode selected in Horopter Check (page 74) in the 3D Setting menu of the Function Setting menu. Flip H: The 3D video signals are inverted horizontally and displayed. Note Use the controller with software version 1.6 or higher to assign Horopter Check or Flip H to a function button of the controller. Black Frame Insertion: The signal is displayed in black frame insertion mode (only for BVM-L and PVM-L series). Black Detail Mode: The signal is displayed in black detail mode (only for BVM-L and PVM-L series). Note Use the controller with software version 1.3 or higher to assign Black Detail Mode to a function button of the controller. Degauss: The CRT is degaussed (only for BVM-A series). Sets display mode of the display window. [On]: Always displayed. Auto: Displayed during operating by the remote connection and disappears automatically after operation. Off: Not displayed. 94 Controller Menu