Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 22
Preparations, Environments of the Installation Location, Input Adaptors, Environments of
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2 Preparations Preparations 2 Chapter Environments of the Installation Location Illumination environments The apparent color reproduction on the monitor is greatly affected by ambient light or glare. Viewing angle The ideal viewing angle is within 5 degrees (up/down/left/ right) off the center of the monitor screen when the operator views the entire monitor screen. Keep the viewing angle within 15 degrees off the center of the monitor screen. Input Adaptors Each input adaptor can be installed in any input option port on the monitor. Caution When you install the following input adaptors to this equipment, use those with the serial numbers given below. • BKM-220D with serial number 2100001 or higher This equipment may not meet the requirements of the electromagnetic interference standard if designated input adaptors are not installed. • BKM-227W with serial number 2100001 or higher This equipment may not work correctly or you may not be satisfied with their performance if designated input adaptors are not installed. • BKM-229X with serial number 2200001 or higher This equipment may not work correctly or you may not be satisfied with their performance if designated input adaptors are not installed. • BKM-243HS with serial number 2108355 or higher This equipment may not meet the requirements of the electromagnetic interference standard or work correctly, or you may not be satisfied with the performance if designated input adaptors are not installed. • BKM-250TG with serial number 7300001 or higher To enable all five display modes of the 3D signal analyzing function, use the input adaptor with serial number 7300001 or higher. Caution To reduce the risk of electric shock, turn off the MAIN POWER switch of the monitor and disconnect the AC power cord before installing or removing adaptors. 22 Environments of the Installation Location / Input Adaptors