Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 117

Appendixes For the serial numbers of the input adaptors available for this unit, see "Input Adaptors" (page 22). \Design and specifications are subject to change without notice. Notes • Always make a test recording, and verify that it was recorded successfully. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE. • Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. • SONY WILL NOT BE LIABLE FOR THE LOSS, REPAIR, OR REPRODUCTION OF ANY DATA RECORDED ON THE INTERNAL STORAGE SYSTEM, RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS. • SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND. Specifications (BVM-E170A) Picture performance Panel OLED panel Picture size (diagonal) 419.7 mm (16 1/2 inches) Effective picture size (H × V) 365.8 × 205.7 mm (14 1/2 × 8 1/8 inches) Resolution (H × V) 1920 × 1080 pixels (Full HD) Aspect 16:9 Pixel efficiency 99.99% Panel drive RGB 10-bit Panel frame rate 48 Hz, 50 Hz, 60 Hz, 72 Hz, 75 Hz1) See "Picture Frame Display" (page 136). 1) 48 Hz, 60 Hz and 72 Hz are also compatible with a frame rate of 1/1.001. Viewing angle (Panel specification) 89º/89º/89º/89º (typical) (up/down/left/right, contrast > 10:1) Normal scan 0% scan Native scan Mapping the pixels of the signal to the panel to one-to-one mode, or displaying an SD signal of non- square pixels (the number of H pixels of the signal system is 720 or 1440) or a 640 × 480 SD signal of HDMI/ DisplayPort video by scaling processing of doubling for the V direction and correct aspect ratio for the H direction and also optimizing and displaying a picture by modifying the aperture coefficient value, filter coefficient value, etc. Under scan 3% under scan Over scan Mask of 5% over scan portion in the normal scan Color temperature D55, D61, D65, D93, D-Cine2), (Setting possible in other color temperature) 2) D-Cine: x=0.314 y=0.351 Standard luminance 100 cd/m2 (Preset1 to Preset5) 48 cd/m2 (Preset (D-Cine)) (100% white signal input) Color space (color gamut) ITU-R BT.709, EBU, SMPTE-C, D-Cine3), E170 Native4), S-GAMUT5) 3) Chromaticity point of SMPTE RP 431-2 is not covered in full. 117 Specifications (BVM-E170A)