Sony BVME170A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 31
Turning on the Power (BVM-E250A), Connecting the AC Power Cord, Turning on the Monitor
View all Sony BVME170A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2 Preparations Notes • When an optional LAN cable is connected, use a shielded-type cable to prevent a malfunction due to noises. • We recommend to use an optional switching hub with auto selection function (AUTO MDI/MDI-X) of a straight/cross cable. 3 Connect the output cable on the AC adaptor supplied with controller to the DC 5V/12V IN connector of the controller. Note When the multiple units are connected, set for the LAN before setting the NETWORK switch to LAN (page 35). 4 Set the NETWORK switches of each monitor and the controller to LAN. Turning on the Power (BVM-E250A) Connecting the AC Power Cord 1 Plug the AC power cord into the AC IN connector on the left side panel. Then, attach the AC plug holder (supplied) to the AC power cord. AC power cord (supplied) AC plug holder (supplied) Attach the AC plug holder to the AC power cord, and connect the cord to the AC IN connector so that the cord does not come loose. 2 Slide the AC plug holder over the cord until it locks. To disconnect the AC power cord Pull out the AC plug holder while pressing the lock levers. Turning on the Monitor Press the MAIN POWER switch on the left side panel to turn on the power. When you turn on the monitor for the first time after purchasing it, the Select Area screen is displayed. Select the area where you intend to use this monitor. For selecting the area, see page 33. 31 Turning on the Power (BVM-E250A)