Sony HCD-E300 Operating Instructions - Page 60
Identifying the unit with a specific S-AIR sub unit (Pairing operation), For the surround amplifier
View all Sony HCD-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Identifying the unit with a specific S-AIR sub unit (Pairing operation) For the surround amplifier For the S-AIR receiver It is easy to set the same ID for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system's sound if IDs are the same, or you may receive sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation. x Before pairing Sound transmission is established by the ID (example). Your room This unit Neighbor ID A ID A S-AIR sub unit ID A S-AIR sub unit x After pairing Sound transmission is established between the paired unit and S-AIR sub unit(s) only. Your room This unit Neighbor ID A No transmission ID A S-AIR sub unit ID A S-AIR sub unit Pairing To perform pairing 1 Place the S-AIR sub unit that you want to pair near the unit. Note • Remove headphones from the surround amplifier (if connected). 2 Match the IDs of the unit and the S-AIR sub unit. • To set the ID of the unit, see "To set the ID of the unit" (page 57). • To set the ID of the S-AIR sub unit, refer to the operating instructions of the S-AIR sub unit. 3 Press SYSTEM MENU. 4 Press X/x repeatedly until "S-AIR MENU" appears in the front panel display, then press or c. 5 Press X/x repeatedly until "PAIRING" appears in the front panel display, then press or c. Note • When the wireless transmitter is not inserted in the unit, "PAIRING" cannot be selected. 60US