Sony HCD-E300 Operating Instructions - Page 84
[Network Settings], Select [Proxy Server] and [Port], - service manual
View all Sony HCD-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
[Network Settings] You can make detailed settings for Internet and network. x [Internet Settings] These items are necessary when you connect to the Internet via a network cable. Enter the respective (alphanumeric) values for your broadband router or Wireless LAN router. The items that need to be set may differ, depending on the Internet service provider or the router. For details, refer to the instruction manuals that have been provided by your Internet service provider or supplied with the router. 1 Press X/x to select [IP Address Acquisition], then press . 2 Press X/x to select an item, then press . [Use DHCP]: Select this when DHCP (Dynamic Host Configuration Protocol) server settings are available from your Internet service provider. The network settings necessary for the system will be assigned automatically. If you set [DNS Server Auto Acquisition] to [Off], set the following items: - [DNS Server (Primary)] - [DNS Server (Secondary)] [Use Static IP Address]: Set the IP address manually according to your network environment. Set the following items: - [IP Address] - [Subnet Mask] - [Default Gateway] - [DNS Server (Primary)] - [DNS Server (Secondary)] Note • When you set the [DNS Server (Primary)]/ [DNS Server (Secondary)] addresses manually, enter the [DNS Server (Primary)] address. Otherwise, the [Internet Settings] will be set incorrectly. 3 If your ISP has a specific proxy server setting, press X/x to select [Proxy Settings], then press . The [Proxy Settings] display appears. If the proxy server does not have a specific setting, go to step 8. 4 Press X/x to select [Use of Proxy Server], then press . 5 Press X/x to select [On], then press . 6 Select [Proxy Server] and [Port], and enter the settings. To enter the proxy server, see "To enter characters" (page 84). 7 Press RETURN. 8 Press X/x to select [Network Diagnostic], then press . 9 Press C/c to select [Start], then press . 10 Check that the message [Network connections are correct.] appears. The setup is finished. If the message does not appear, follow the on-screen messages. To enter characters The display for entering characters appears when you select [Proxy Server] in [Proxy Settings]. Proxy Server Entry Clear Clear All Space 0 Letter Type Symbol Cancel Finish 1 Press the number button repeatedly to select a character. Example: Press the number 3 button once to enter [D]. Press the number 3 button three times to enter [F]. 2 Press c, and enter the next character. 3 Press YELLOW ([Finish]) to finish. 84US