Sony HCD-E300 Operating Instructions - Page 62
Press, to select the desired setting., Press SYSTEM MENU., When you set RF CHANGE to OFF
View all Sony HCD-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4 Press X/x to select the desired setting. • "AUTO": Normally select this. The system changes "RF CHANGE" to "ON" or "OFF" automatically. • "ON": The system transmits sound by searching for a better channel for transmitting. • "OFF": The system transmits sound by fixing the channel for transmitting. 5 Press . The setting is made. 6 Press SYSTEM MENU. The system menu turns off. 7 When you set "RF CHANGE" to "OFF," select the ID so that sound transmission is most stable (page 57). Note • In most cases, you will not need to change this setting. - If "RF CHANGE" is set to "OFF," transmission between the unit and S-AIR sub unit can be performed using one of the following channels. - S-AIR ID A: equivalent channel for IEEE 802.11b/g channel 1 - S-AIR ID B: equivalent channel for IEEE 802.11b/g channel 6 - S-AIR ID C: equivalent channel for IEEE 802.11b/g channel 11 • The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s). 62US