Toro 20330 Service Manual - Page 105
BBC Cable Removal Toro Vacu Power, Lawn-Boy Medallion
UPC - 021038203300
View all Toro 20330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
BBC / BOS / BCS 11. Complete BBC service by checking BBC and selfpropel controls, making sure that all are functioning normally. Adjust as necessary. BBC Cable Removal (Toro Vacu Power/ Lawn-Boy Medallion) 1. Remove the two flanged head self-tapping screws securing the screen panel to the housing and remove the screen panel as shown in Figure 178. 3. Bend the throttle control locking tab back slightly and tap the throttle control from the control panel with a rubber mallet. Place a piece of duct tape over the heads of the handle and the BBC control box. This will prevent the control box components from falling out of the handle during disassembly. 4. Remove the three flanged head screws securing the control box halves. 5. Remove the two nylon locknuts securing the control box to the handle and carefully remove the right control housing half. 6. Slip the end of the BBC cable from the cable lever and remove the cable (Fig. 179). A B A. Screws Fig 178 3428-0079 B. Screen Panel 2. On early models, the end of the BBC cable sheath has two protruding ears that catch the underside of the cable bracket. Remove the cable by squeezing the ears together, then pulling the cable out vertically. Later models use a clip that must be pushed to the side to remove. A. BBC cable lever Fig 179 B. BBC cable fig 36 WPM Drive Systems Manual 6-19