Toro 20330 Service Manual - Page 74

Intermediate Shaft Assembly, Installation

Get Toro 20330 - Low Wheel Walk Power Mower PDF manuals and user guides
UPC - 021038203300
View all Toro 20330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

THREE SPEED TRANSMISSION Intermediate Shaft Assembly Note: Before assembling, coat the intermediate shaft with No. 2 lithium-based grease. Apply a light bead of lithium-based grease to flange. 1. Slip an intermediate shaft bushing onto the left end of the intermediate shaft, flanged end first (Fig. 128). 2. Slide the intermediate shaft gears onto the intermediate shaft in this order: a. 25 tooth gear b. 20 tooth gear c. 15 tooth gear/bevel gear 3. Slide 2 spacer washers onto the intermediate shaft next to the bevel gear and follow with an intermediate shaft bushing, flanged side first. 4. Drop the intermediate shaft into the gearcase, making sure that all gears engage properly. 5. Fill the gear case with 6 oz. (177cc) of No. 2 lithiumbased grease, then install the cover with the six flanged head self-tapping capscrews. 6. Secure the input pulley nut. A. Bushings B. Gears Fig 128 C. Spacers MVC-000 Installation For assembly, reverse the removal process. Torque the belt guide fasteners to 130 in-lbs. (15 Nm) (Fig. 129). 4-10 Fig 129 3428-0196 WPM Drive Systems Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
4-10
WPM Drive Systems Manual
THREE SPEED TRANSMISSION
Intermediate Shaft Assembly
Note: Before assembling, coat the intermediate
shaft with No. 2 lithium-based grease. Apply a
light bead of lithium-based grease to flange.
1.
Slip an intermediate shaft bushing onto the left end
of the intermediate shaft, flanged end first (Fig. 128).
Fig 128
MVC-000
Fig 129
3428-0196
For assembly, reverse the removal process.
Torque the belt guide fasteners to 130 in-lbs. (15 Nm)
(Fig. 129).
2.
Slide the intermediate shaft gears onto the
intermediate shaft in this order:
a. 25 tooth gear
b. 20 tooth gear
c.
15 tooth gear/bevel gear
3.
Slide 2 spacer washers onto the intermediate
shaft next to the bevel gear and follow with an
intermediate shaft bushing, flanged side first.
4.
Drop the intermediate shaft into the gearcase,
making sure that all gears engage properly.
5.
Fill the gear case with 6 oz. (177cc) of No. 2 lithium-
based grease, then install the cover with the six
flanged head self-tapping capscrews.
6.
Secure the input pulley nut.
A. Bushings
C. Spacers
B. Gears
Installation