Toro 20330 Service Manual - Page 125

Reassembly

Get Toro 20330 - Low Wheel Walk Power Mower PDF manuals and user guides
UPC - 021038203300
View all Toro 20330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 125 highlights

HANDLES AND CONTROL CABLES 7. Slide the handle up and off (Fig. 232). Reassembly Reassemble in reverse order. 1. There are 3 bosses on the inside of the guide. The top and bottom ones receive the mounting screws. The boss in the photo must line up with the end of the control rod. This boss keeps the rod from moving sideways and falling out of the handle (Fig. 234). Fig 232 DSC-4819a 8. If you need to replace the traction control rod or either of the springs, one of the handle guides will need to be removed. The guides are held on by 2 screws (Fig. 233). Fig 234 DSC-4828a 2. One end of the springs goes into a hole in the handle, the other around the traction control rod. The springs apply pressure to the handle to hold it in the retracted, upper position (Fig. 235). Fig 233 DSC-4821a WPM Drive Systems Manual Fig 235 DSC-4814 7-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
7-5
WPM Drive Systems Manual
Reassembly
HANDLES AND CONTROL CABLES
7.
Slide the handle up and off (Fig. 232).
Fig 232
DSC-4819a
8.
If you need to replace the traction control rod or
either of the springs, one of the handle guides will
need to be removed. The guides are held on by 2
screws (Fig. 233).
Fig 233
DSC-4821a
2.
One end of the springs goes into a hole in the
handle, the other around the traction control rod. The
springs apply pressure to the handle to hold it in the
retracted, upper position (Fig. 235).
Fig 234
DSC-4828a
Reassemble in reverse order.
1.
There are 3 bosses on the inside of the guide. The
top and bottom ones receive the mounting screws.
The boss in the photo must line up with the end of
the control rod. This boss keeps the rod from moving
sideways and falling out of the handle (Fig. 234).
Fig 235
DSC-4814