Toro 20330 Service Manual - Page 94
C. Cable lever
UPC - 021038203300
View all Toro 20330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
BBC / BOS / BCS 3. Place a piece of duct tape over the heads of the carriage bolts that slide through the handle and the left control box housing. This will aid in assembly. 4. Slide the sleeve onto the upper carriage bolt making sure that it passes through the control bar, traction lever, and left control housing. 5. Position the control hook and torsion spring in the rocker arm as shown in Figure 156. Secure with the roll pin making sure that the roll pin is flush with the side indicated in the figure. Loosely install the BBC cable lever as indicated. When correctly installed, the control hook and the cable lever will be engaged. 6. Slide the rocker arm assembly over the upper carriage bolt and sleeve making sure that the sleeve passes through the cable lever. Also make sure that the roll pin passes through the hole in the control bar. 7. Release the BBC cable lever from the control hood and install the BBC cable into the cable lever (Fig. 157). Note: The BBC cable lever is behind the spring. Fig 156 A. Control hook B. Roll pin flush with this side C. Cable lever fig 35 A. BBC cable lever Fig 157 B. BBC cable fig 36 6-8 WPM Drive Systems Manual