Toro 20330 Service Manual - Page 109
A. Bearings
UPC - 021038203300
View all Toro 20330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
4. Turn the mower on its side. Remove the blade and the BBC cover. Brush any grass clippings out of the area. Locate the idler arm. Remove the bolt and locknut that retains the idler pulley. Note the pulley is on the deck side and there is a spacer between the pulley and idler arm (Fig. 186). With the pulley removed, the idler arm can pivot away from the brake drum and the belt can be removed. BBC / BOS / BCS Slide the lever off the shaft and the idler/brake shaft can be pulled down and out of the housing (Fig. 188). Fig 188 3428-0192 Fig 186 3428-0182 5. Now reach around to the top of the housing and pull the screw out of the lever (Fig. 187). There are two bearings pressed into the housing that the idler shaft rides on. If they are to be replaced, press them out at this time (Fig. 189). A Fig 187 3428-0179 A. Bearings Fig 189 3428-0185 WPM Drive Systems Manual 6-23