Toshiba 19CV100U User Manual - Page 34
Tuning channels
View all Toshiba 19CV100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 6: Using the TV's features Input labeling example: The screen below is an example of how you could label the inputs if you connected a VCR to Video, a Video Recorder to HDMI 1, and a DTV set-top box to HDMI 2. Also note that the ColorStream HD input is labeled "Hidden", which means that input will be skipped over when is pressed. To clear the input labels: 1 From the Preferences menu, press or to select Input Labeling and then press . 2 Highlight Reset and then press . Tuning channels Setting the Channel Tuning Mode This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, the Input Configuration must be set to Antenna ( Page 28). The channel tuning mode has three options. Mode Description Standard Both analog and digital channels can be tuned normally. Auto (Default) Digital Digital channels will have priority when manually entering a channel number using the Channel Number buttons (0-9) on the remote control, analog channels can still be tuned by or , if available. Only digital channels can be tuned. 1 From the Setup menu, press or to select Installation and then press . 2 Press or to highlight Terrestrial, and then press or to select Channel Tuning Mode. 3 Press or to select your desired mode. Note: Even if the Channel Tuning Mode is set to Digital, analog channel 3 will still be the default channel to prevent the initial case where no digital channels have been found in prior channel scans. Tuning to the next programmed channel To tune to the next programmed channel: Press or on the remote control or PLAY/ CHANNEL or STOP/CHANNEL on the TV control panel. Note: This feature will not work unless you program channels into the TV's channel memory ( Page 29). 34