Toshiba A60-S1691ST User Manual - Page 149
Memory expansion, Installing memory module
View all Toshiba A60-S1691ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
User's Manual 2. Please do not remove the SD card/MultiMediaCard/ Memory Stick from the SD card/MultiMediaCard/ Memory Stick slot while in Standby or in Hibernation state. If you do, PC may become unstable or the data in SD card/MultiMediaCard/Memory Stick may be lost. 3. Please do not turn off PC or go into Standby/Hibernation ,while computer is accessing the card; If you do, PC may become unstable or you may lose data. OPTIONAL DEVICES Memory expansion You can install additional memory in the computer's memory module to increase the amount of RAM. CAUTION: Only memory module with the following parts numbers can be installed: 256 MB 512MB 1024MB Installing memory module To install a memory module, make sure the computer is in boot mode then: 1. Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3. CAUTIONS: 1. If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. 2. Do not try to install a memory module with the computer turned on or turned off in Standby and Hibernation mode. You can damage the computer and the memory module. 3. If you install a memory module that is not compatible with the computer, a beep will sound when you turn on the power. If the module is installed in slot A, there will be a long beep followed by a short beep. If the module is in slot B, there will be a long beep followed by two short beeps. In this case shut down the power 8-6 and remove the incompatible module.