Xerox 8560MFP Advanced Features Guide - Page 52
Windows 98 SE Troubleshooting, Verifying Settings
UPC - 095205428841
View all Xerox 8560MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Windows 98 SE Windows 98 SE Troubleshooting This Troubleshooting section assumes you have completed the following tasks: ■ Verified that the system is plugged in, turned on, and connected to an active network. ■ Installed a PostScript print driver. ■ Verified that the system is receiving network information by monitoring the LEDs on the back of the device or on the CentreDirect External Print Server. When the system is connected to a functioning network and receiving traffic, its link LED is green, and its amber traffic LED is flashing rapidly. ■ Printed and kept a current copy of the Configuration page. Verifying Settings To verify settings: 1. Right-click Network Neighborhood on the desktop, and then click Properties. 2. Click the Configuration tab. A list of installed network components appears for the Client for Microsoft networks. 3. If any of the necessary components are not installed, install them, and then restart the system. When the system is restarted, return to this document. 4. Click Start, click Settings, and then click Printers. The Printers window appears. 5. Right-click the printer icon, and then click Properties. 6. Select the Details tab. 7. Verify the following: a. The printer driver name in the Print Using the Following Driver list. If necessary, reselect or install a new printer driver. b. The Port name in the Print to the Following Port list. If necessary, re-select the correct name. Note: Send a print job to the system. If the system does not print, select PhaserSMART Technical Support on the Troubleshooting tab of your Windows printer driver to access PhaserSMART Technical Support. See also: www.xerox.com/office/8510_8560support Phaser® 8510/8560MFP Multifunction Product 3-15