Xerox 8560MFP Advanced Features Guide - Page 61
Quick Install Steps, From the System, From Your Computer
UPC - 095205428841
View all Xerox 8560MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
UNIX (Linux) Quick Install Steps Perform the following procedures to set up the system and install the appropriate drivers. From the System To set up the system: 1. Verify that both TCP/IP protocol and the proper connector are enabled. 2. On the control panel, select one of these IP address options: ■ Allow the system to set up a DHCP address. ■ Enter the IP address manually. 3. Print the Configuration page and keep it for reference. From Your Computer To install the system: 1. Go to www.xerox.com/drivers. 2. Select the product type, the product family, and then select the model. 3. Click the Drivers & Downloads link. 4. Select Unix from the Operating System drop-down menu, and then click Go. 5. From the list of files provided, click the Printer Package for use with CentreWare for Unix link. The File Download screen appears displaying information about the download file. 6. Click the Start button to install the Unix driver. 7. Print a test page and verify the print quality of the printed page. Note: If print-quality problems exist, or your job did not print, see the User Guide at www.xerox.com/office/8510_8560support or access PhaserSMART Technical Support through CentreWare IS. To access PhaserSMART Technical Support: 1. Launch your web browser. 2. Enter the system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Select Support. 4. Click the PhaserSMART Diagnostic Tool link to access PhaserSMART. Phaser® 8510/8560MFP Multifunction Product 3-24