Xerox 8560MFP Advanced Features Guide - Page 66
Controlling Startup Printing, System, Address, Properties, General, System Defaults, Startup
UPC - 095205428841
View all Xerox 8560MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
System Settings Controlling Startup Page Printing The system can produce a Startup page each time the system is turned on or reset. The factory default is On. You can print the Startup page at any time from the Information Pages menu. To turn on/off automatic printing of the Startup page, use one of the following options: ■ The system's control panel ■ CentreWare IS Using the Control Panel To turn on/off automatic printing of the Startup page on the control panel: 1. Press the System button. 2. Select General Setup, and then press the OK button. 3. Select System Controls, and then press the OK button. The Startup Page is highlighted. The setting (On or Off) is displayed. 4. Press the OK button to change the setting. Using CentreWare IS To turn on/off the automatic printing of the Startup page using CentreWare IS: 1. Launch your web browser. 2. Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the General folder on the left sidebar. 5. Select System Defaults. 6. Select Off or On from the Startup Page drop-down list to change the setting. 7. Click the Save Changes button at the bottom of the page. Printing the Startup Page from the Control Panel To print the Startup page on the control panel: 1. Press the System button. 2. Select Information, and then press the OK button. 3. Select Information Pages, and then press the OK button. 4. Select Startup Page, and then press the OK button to print. Note: You can also print the Startup page from the Troubleshooting tab of the Windows printer driver. Phaser® 8510/8560MFP Multifunction Product 4-5